New image for itgate tgs100
remember this is a clone for TM9100 use at your own risk
if you don't know what you doing you should live to the expert

----------------------------------------------------------------------
*How to do auto-update with ITGATE Control Center
----------------------------------------------------------------------

1) Download below file and Unzip the file on new folder.
2) Run the ITGATE Control Center.
3) Click "Update" icon.
4) Insert your IP address.
5) Click "Auto update" icon.
6) Select the folder containing update files.
7) Autoupdate will be started.
8) Wait until TGS 100 reboot automatically.
*How to update TGS100 with Memory Card automatically
1) Copy all below files(after unzip) inside folder to the memory card.

2) Switch off TGS 100 and insert the memory card into the memory card slot of front panel.
3) Switch on TGS 100 and you can see "doun" on LED display, it means downloading is started.
4) Soon after, you can see downloading process by number(1~100) on LED display. Please wait until it shows "done".
5) After checking "done" on LED display, remove Memory Card and switch off and on again.
6) Update completed!
Warning) Do not remove memory card during reading and writing mermory card in any cases.



----------------------------------------------------------------------
*How to update TGS 100 by Flashing through serial port
----------------------------------------------------------------------

1) For Serial update, please click hereunder to download the image.
2) Power off TGS 100.
3) Power on while pressing OK button on front panel. If you can see UPGD on LED, release OK button.
4) Run "ITGATE Control Center".
5) Click "Serial" icon.
6) Select the image file from FILE.
7) Press OK button on front panel to start flashing.
8) When the flashing is done, LED shows Done and tool shows message, "complete".
9) Power off and on again.
*How to update by Internet
1) Press MENU button on the remote controller and go into " Setup -> Expert Setup -> Software Update -> Internet Update" and select the image.
2) Follow as prompted on the menu..
Improvements are :
- 16:9 switch mode improved(add 16:9 always/pillar box mode)
- Audio subtittle improve
- The latest Enigma
Better OSD performance
ZDF epg crash bug fixed
Main menu shortcut added
- Card reader driver improved
- WSS bug fixed
- Sat config bug fixed
- Diseqc manual motor moving function bug fixed
- System memory increase(27Mbyte -> 31Mbyte)
- SUB Service bug fixed
- Audio Track selection menu bug fixed
- EPG memory leak bug fixed
- EPG list/info bar speed improved
- DHCP improved
- Net driver register API bug fixed and added(Multicast API)

Thanks to the cooperation of "Sandbox Team" on 'IBoot' specially.